The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: May 24, 2016 at 16:58:51
From: Vocaloid, []
Subject: Re: Port tuning frequency for home theater?

If you can do flat to 30 hz or so, room gain should
be enough to even out the rest, and it should cover
the bulk of the sound effects and music program of
most movies. It can be adjusted to taste (or needs
of the driver) too. But if space allows and the
driver is ok with it, maybe a little lower wouldn't
be a bad thing!

But most average to low end subwoofers from box
stores can scarcely touch that. I haven't taken any
readings, but from what little experience I've had,
they usually cut a few corners to get the subwoofer
enclosures down to a reasonable size for retail

  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
  • Posted with TalkShop version 2.77 BETA

    [Previous Message] [Next Message]

    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

    websmall.gif (584 bytes)