The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: December 24, 2012 at 15:38:45
From: Brian, [216.110.116.55]
Subject: Re: Ports


Most design programs provide net box volume and port size / length. You can mount the ports inside the box, outside the box, or any combination in-between, once the net box volume is maintained.

Concerning bandpass enclosures, make sure you measure Fb after building your box. You might find that the ports need to be trimmed a little to achieve the target Fb.


Moderated By: brian@diysubwoofers.org


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
  • Posted with TalkShop version 2.77 BETA

    [Previous Message] [Next Message]




    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)